TestBenchmark logoTestBenchmark

Keyboard Ghosting Test

This keyboard ghosting test finds the key combinations your keyboard drops — hold the keys you actually use together and see exactly which one goes missing. It also measures your key rollover and tells you whether your board is 2KRO, 6KRO or NKRO. No download, no sign-up, nothing uploaded. One honest limit up front: this is the keyboard test, not the monitor one — the Ghosting Test checks your screen for motion blur, this page checks your keyboard for dropped keys.

Your keyboardNot started yet

Click Start test, then press keys on your physical keyboard. Each key lights up blue while you hold it and stays green once it has registered. The page reads the physical key position, so your language layout does not matter — the key in the Q position still reports as Q. Numpad and media keys are not drawn on the board below, but they still register in the Last key readout and count in the held and rollover numbers.

Esc
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
`
1
2
3
4
5
6
7
8
9
0
-
=
Bksp
Tab
Q
W
E
R
T
Y
U
I
O
P
[
]
\
Caps
A
S
D
F
G
H
J
K
L
;
'
Enter
Shift
Z
X
C
V
B
N
M
,
.
/
Shift
Ctrl
Win
Alt
Space
Alt
Ctrl
←
↑
↓
→

Greyed keys (Win) are the ones your browser usually never receives — they are not counted as missing. The Fn key is not drawn at all: it never leaves the keyboard.

Keys tested

0 / 75

Held right now

0

Most keys at once

0

Rollover class

—

Last key: —

1 · Guided ghosting combos — the five that matter

A random mash tells you almost nothing: the number of keys that ghost depends entirely on which keys you pressed, not how many. Run each combo below, hold its keys together, then release them all — the page reports pass or fail and names every key that was blocked, plus any phantom key that appeared without being pressed. Work through all five: a board can pass four and fail the one your game needs.

W + A + Shift + Space

Move + sprint + jump — the combo every game needs.

Not tested yet.

W + D + Space

Diagonal jump — strafe right and jump at once.

Not tested yet.

Ctrl + Shift + E

Shortcut chord — three-key shortcuts expose ghosting fast.

Not tested yet.

Shift + Up + Right

Arrow chord — sprint while steering with the arrow keys.

Not tested yet.

Q + W + E + R

Ability row — four keys in a line, the classic matrix trap.

Not tested yet.

No combo running — pick one above.

Combos that failed on this keyboard:

None yet — run the combos above.

2 · Rollover test — how many keys at once?

Hold as many keys as you can at the same time — a cluster like Q W E A S D plus Shift, then keep adding more. The “Most keys at once” counter above is your rollover result. Modifier keys (Shift, Ctrl, Alt) are counted separately by the keyboard, so they do not count against the six: the number is the ordinary keys. One honest note: a maximum of 4 only proves that 4 reached the page in that run — it does not establish the board's full limit, so hold deliberately and try again before you decide.

No rollover result yet — hold several keys at once.

3 · Your keyboard report

The report reads your rollover result and every combo you ran, and says in plain words what the numbers mean — whether the board is 2KRO, 6KRO or NKRO, which combinations it drops and what to do about each. A key that fails in only one combination usually works fine on its own, so a blocked combo is never reported here as a dead key. Copy the text version to paste into a support ticket, a sale listing or a message to a friend.

Honest limits

A web page only sees the key events your operating system passes on. It cannot see the Fn key at all, it often cannot see the Windows or Command key, Print Screen or media keys, and browser shortcuts such as Ctrl+W or Ctrl+T are intercepted before the page sees them — none of that is a keyboard fault. The result also depends on the keyboard hardware and on how it is connected: many boards are full NKRO over USB and six-key limited over Bluetooth, so test each connection mode separately. And this page cannot measure polling rate or input latency — no web page can, because the browser sees one event per key change and the operating system adds its own delay. Nothing you press is stored or sent anywhere.

How to test for ghosting in 3 steps

1 · Start the test and press every key once. Click “Start test” above so the board has focus, then work across your physical keyboard row by row. Each key lights up blue while you hold it and stays green once it has registered, and the counter keeps score — 75 keys make a full pass of the main board (the greyed Win key is not counted: your browser never receives it). If a key only lights up when you press it harder than the others, that is an early warning sign: healthy switches fire with a normal press, every time.

2 · Run the guided combos. Pick the first combo, hold its keys together, then release them all. The page tells you straight away whether the combination passed, which key was blocked, and whether any phantom key appeared. Work through all five — the gaming combo, the diagonal jump, the shortcut chord, the arrow chord and the ability row — because a board can pass four and fail the one your game needs. Then hold as many keys as you can at once for the rollover number: the “Most keys at once” counter is the result.

3 · Read the report, not one number. Press “See my keyboard report”. It names the rollover class, lists every combo that failed with the blocked keys, and says what to do about each. Here is a worked example. Hold W + A + Shift + Space on a budget laptop board: only 3 of the 4 keys light up — Space never registers while the other three are held, but Space works fine on its own. That combination is blocked: the board cannot read those four keys together, which is a matrix limit, not a dead key. Remap jump to a key on a different part of the board, or use a board with NKRO. A single failed combination does not mean the keyboard is broken — it means that combination does not work on that board.

What ghosting is, and why it happens

Inside a keyboard the switches sit on a grid of rows and columns, not on separate wires: each key sits where a row and a column cross, and the controller scans the grid to see which crossings are connected. When three keys pressed together happen to form three corners of a rectangle in that grid, current can flow through the fourth, unintended corner, and the controller cannot always tell a genuine fourth key press from current merely passing through. Depending on the design, that produces one of two outcomes: a phantom key gets reported that nobody actually pressed, which is true ghosting, or the controller plays it safe and simply ignores one of the keys you did press, which is called blocking or jamming. Most modern keyboards are designed to block rather than ghost, because a missing input is a smaller nuisance than a false one — but in a game both feel identical: a key that should have worked did not. The fix is in the wiring, not in software: better boards add a diode to each switch so current can only flow one way, and every key can be read independently. That is what makes true NKRO possible.

2KRO, 6KRO and NKRO — and the USB 6-key limit

Key rollover is how many keys a keyboard can report at the same time. 2KRO means any two keys work together and a third may be ignored — common on cheap membrane boards. 6KRO means six regular keys at once, plus the modifiers, which are counted separately — the classic USB keyboard standard, and enough for typing and most games. NKRO means every key on the board can be held at once and all of them register. The number 6 is not about switches at all: it comes from the USB HID boot protocol, the simple keyboard report format defined so that BIOS firmware and other minimal environments can read a keyboard without a full driver. A genuine NKRO keyboard gets around it with a custom report format once your operating system loads its driver — which is why the same board can be full NKRO in a game and drop back to six keys in a BIOS screen. If your board stops at exactly 6, check its software for an NKRO or gaming-mode toggle: many ship in 6KRO mode out of the box.

Anti-ghosting is not the same as NKRO

This is the distinction most marketing blurs together. Anti-ghosting means the keyboard has diodes installed, one per key, that force current to flow in only one direction through the matrix — that closes off the phantom path and prevents false ghost reports. It does not, by itself, guarantee that any particular number of keys can be read simultaneously: a board can have anti-ghosting diodes on every key and still cap out at 6KRO if its firmware or USB report format only allows six simultaneous keys through. N-key rollover is a separate claim about how many genuine simultaneous presses the keyboard can accurately report. A board can be one without the other. So when a spec sheet says “anti-ghosting”, ask: anti-ghosting by blocking (limited rollover) or by diodes (real rollover)? Marketing rarely says — testing does, and this page shows both numbers: the rollover count and the combos that actually fail.

Bluetooth and wireless can quietly cut your rollover

If your keyboard has more than one connection mode, do not assume rollover is the same across all of them. Many wireless keyboards, including ones with genuine NKRO over a wired USB connection, implement their Bluetooth mode using the standard HID-over-GATT keyboard profile, which is built around the same limited report format for broad compatibility with phones, tablets and other devices. The practical result is a keyboard that is full NKRO over USB and six-key limited over Bluetooth, with nothing in the marketing telling you this changes between modes. A proprietary 2.4 GHz dongle is not automatically better — it depends entirely on what the manufacturer chose to implement on that specific receiver. Test the exact combinations you rely on over each connection mode separately: a combination that works perfectly wired and drops a key over Bluetooth has told you something a generic full-board mash test never would.

What to do if a combination fails

If a specific combination genuinely fails and it is one you rely on, first check for a firmware update — manufacturers occasionally revise matrix scanning logic. Then check whether the keyboard's software has an NKRO or gaming-mode toggle that is not enabled by default, since some ship in a compatibility-first 6KRO mode out of the box. If neither helps, the practical fix is remapping one of the conflicting keys in that specific combination to a key on a different part of the matrix, which most keyboard software allows: the underlying matrix geometry is fixed in hardware and will not change, but moving one key out of the bad rectangle works around it permanently. If the keyboard is failing combinations it is specifically marketed as supporting, that is a legitimate case for a warranty claim — attach this page's report, which names the exact failing combination, and demonstrate it failing consistently. And remember the difference that matters: a key that fails in one combination but works on its own is a matrix limit, not a dead key — clean it or replace the switch only if it fails everywhere.

Testing a used keyboard before you buy

On a second-hand board, the ghosting test is the check sellers skip. Open this page on the seller's computer, press every key once to prove none is dead, then run all five guided combos and hold as many keys as you can for the rollover number. A board that passes the single-key check but drops W + A + Shift + Space is not broken — but it is not the gaming board the listing claims either, and the price should reflect that. Watch for the other signs while you are there: a key that fires twice from one press is switch chatter, a key that stays lit after you let go is stuck, and a board whose rollover stops at 2 or 3 on ordinary combinations is a membrane board wearing a gaming label. Finish with the rest of the setup on this site — a fast keyboard in front of a dead screen corner or a double-clicking mouse is still a bad buy.

Frequently asked questions

What is keyboard ghosting?

Ghosting is what happens when you hold several keys at once and one of them does not register — or, on older designs, a key you never pressed appears. It comes from how keyboards are wired: the switches sit on a grid of rows and columns, and when three keys form three corners of a rectangle in that grid, current can flow through the fourth corner and confuse the controller. Modern boards usually deal with it by blocking: the controller detects the risky combination and simply ignores one of the keys you pressed, which feels like a missed keystroke. A key that fails only in one combination usually works fine on its own, so ghosting is a hardware limit of that combination, not a broken key.

How do I test my keyboard for ghosting?

Click “Start test” on this page, then hold the keys you actually use together — for example W + A + Shift + Space, the way you move, sprint and jump in a game — and check that every one lights up. If a held key stays dark, or a key you are not touching lights up, that combination ghosts on your keyboard. The guided combos above do this properly: run each one, hold the keys, release, and the page tells you exactly which key was blocked and whether any phantom key appeared. Test the combinations you really use, not a random mash — a board can pass a fifteen-key mash and still drop the one combination your game needs, because the failure depends on which keys you pressed, not how many.

What is n-key rollover (NKRO), and how is it different from anti-ghosting?

Key rollover is how many keys a keyboard can report at the same time: 2KRO means two, 6KRO means six regular keys plus the modifiers, and NKRO means every key. Anti-ghosting is a different claim — it is about how the board stops phantom keys, either with a diode under each switch or by blocking combinations it cannot read reliably. A board can have full anti-ghosting on every key and still only support six simultaneous keys, because anti-ghosting says nothing about the number. And a board can be sold as “anti-ghosting” when all it does is block keys. When a spec sheet says anti-ghosting, ask which kind: blocking, or diodes with real rollover. Testing tells you — this page's rollover counter shows the number, and the guided combos show whether the board blocks.

Why does my keyboard only register 6 keys at once?

Because of the standard USB keyboard report, not because your keyboard is cheap. The USB HID boot protocol — the basic mode every USB keyboard supports so it works in a BIOS, a boot menu or any device with no dedicated driver — uses a fixed report: one byte for modifiers, one reserved byte, and six slots for ordinary keys. That format can only describe six non-modifier keys held down at once, full stop. A genuine NKRO keyboard gets around it by switching, once your operating system loads its driver or its own software, to a custom report that sends a full bitmap of every key instead of six fixed slots. That is why the same board can be full NKRO in a game and drop back to six keys in a BIOS screen, or behind a KVM switch: the boot protocol is doing exactly what it was designed to do.

Can keyboard ghosting be fixed?

Usually not by software — key blocking is a physical limit of the keyboard's wiring, and no download, driver update or registry tweak can rewire a matrix. But three things are worth trying before you replace the board. First, check for a firmware update, since manufacturers occasionally revise the matrix scanning. Second, check the keyboard's software for an NKRO or gaming-mode toggle that is not enabled by default — some boards ship in a compatibility-first 6KRO mode. Third, remap one of the conflicting keys to a key on a different part of the board, which most keyboard software allows: the underlying matrix geometry is fixed, but moving one key out of the bad rectangle works around it permanently. If a combination the box specifically promises still fails, that is a legitimate warranty claim — this page's report names the exact failing combination.

Why do some keys never light up in the test?

Because a web page only receives what the operating system passes on, and some keys never reach it. The Fn key is handled inside the keyboard itself — it changes what other keys send and never sends anything of its own. The Windows or Command key, Print Screen and media keys are often grabbed by the operating system first. Browser shortcuts such as Ctrl+W or Ctrl+T are intercepted by the browser before the page sees them. And on many laptops the F-keys share duty with brightness and volume controls, so you may need to hold Fn to test F1–F12 as function keys. A key that never lights up for one of these reasons is not broken — it is reserved. If a normal letter, number or modifier key does not register in any app, then it is a hardware or driver problem.

Does Bluetooth change my keyboard's rollover?

Often, yes — and nothing in the marketing says so. Many wireless keyboards that are full NKRO over a wired USB connection implement their Bluetooth mode using the standard HID-over-GATT keyboard profile, which is built around the same limited report format for maximum compatibility with phones, tablets and other devices. The practical result is a keyboard that is full NKRO over USB and six-key limited over Bluetooth. A proprietary 2.4 GHz dongle is not automatically better: it depends entirely on what the manufacturer chose to implement on that specific receiver. The only way to know for certain is to test each connection mode separately, using the exact key combinations you actually rely on — run the guided combos above over USB, then again over Bluetooth, and compare the two lists.

Does this test work on a laptop keyboard or a phone?

Yes on a laptop keyboard — laptop, desktop, wired or wireless, any board your computer recognises. Laptop boards simply have fewer keys, often no separate numpad, and the F-keys may need Fn held to test as function keys. On a phone it is a different story: a phone has no physical keyboard to test, and its on-screen keyboard does not report physical keys to a web page. To test a keyboard from a phone, plug in or pair a real keyboard first — then the page reads it exactly as it would on a computer. Nothing you press is recorded, stored or sent anywhere: the test runs entirely in your browser, and closing the tab erases it.

How this test works: the page listens for keydown and keyup events on the keyboard board and matches each key by its event.code — the physical key position, so your language layout does not matter. A guided combo passes only when every key in the combination registers while the others are held; a key that never registers is reported as blocked, and a key that registers without being in the combination is reported as a phantom. The rollover number is the most non-modifier keys the browser reported held at the same time. No downloads, no sign-up and nothing uploaded.