TestBenchmark logoTestBenchmark

Ghosting Test

This ghosting test flies a UFO across your screen at an exact, timestamp-driven speed while it measures your display's real refresh rate. Track the UFO with your eyes: the trail it drags is your panel's response time made visible — and the split lanes show how much of the blur is simply frame rate.

A UFO glides across the screen at a speed you choose while the page measures your real refresh rate. Follow the UFO with your eyes — the smear and trails you see are your panel's motion clarity, the same effect behind blurry movement in games.

  • Timestamp-driven motion at 480 to 1,920 pixels per second — the speed on the button is the speed on screen.
  • Frame-rate lanes compare your full refresh rate against half and quarter rates side by side.
  • Dark, grey and bright backgrounds — ghosting changes with background brightness.

Works best in fullscreen · drag the UFO up or down on the screen to test other areas

Blur, overshoot and crosstalk: three different trails

Motion blur is the soft smear behind the UFO. Two things create it: your pixels take time to change colour (response time), and your eyes keep seeing each frame for its whole duration as you track the UFO (persistence). The way to tell them apart is speed — double the UFO speed and persistence blur doubles, while response-time smearing stays roughly the same length in pixels.

Overshoot (inverse ghosting) is a bright or colour-tinted fringe that appears ahead of the moving UFO and on the edges the panel just left. It comes from overdrive: the monitor pushes pixels harder than needed to make them change faster, and they overshoot their target colour before settling. If trails look worse with overdrive set to its strongest mode, this is why — the middle overdrive setting is usually the honest optimum.

Crosstalk is a faint double image or shadow, most familiar from 3D modes but also visible on some panels in normal use where one frame's content leaks into the next. On this test it shows up as a second, dim UFO offset from the first rather than a continuous smear.

What every panel type does

VA panels show the longest dark trails, especially in near-black shades — dark-level transitions are their slowest, so dark scenes smear the most. IPS panels sit in the middle: moderate trails, generally consistent across colours. TN panels are the classic fast option with short trails, paid for with weaker colour and viewing angles. OLED changes pixels almost instantly, so what remains is almost pure persistence blur — the UFO stays readable and separates cleanly, and the half-rate lanes above show exactly why: the blur that is left scales with frame duration, not with the panel.

Whatever panel you have, higher refresh rate is the biggest lever: at 120 Hz each frame is held for half as long as at 60 Hz, so eye-tracking blur roughly halves — the lanes comparison on this page demonstrates it live by pretending your display is slower than it is.

Frequently asked questions

How do I test my monitor for ghosting?

Run this test in fullscreen, set the UFO moving, and follow it with your eyes rather than staring at one point. Look at the trail behind the UFO: a short soft smear is normal, long dark trails mean slow pixel transitions, and a bright fringe ahead of it means overdrive overshoot. Try the dark, grey and bright backgrounds — many panels ghost worst in dark shades, and test again at your monitor's other overdrive settings to compare.

How do I use the UFO ghosting test?

Start at 960 pixels per second on the dark background and track the UFO with your eyes. Change one thing at a time: raise the speed to make trails easier to see, switch backgrounds to check dark and bright scenes, and open the frame-rate lanes to see how much better your full refresh rate looks than half or quarter rate. Your measured refresh rate is shown above the UFO, so you know exactly what the display is running at while you judge.

What does monitor ghosting look like?

A moving object drags a visible trail — a smear, shadow or after-image — behind it, like the UFO above leaving a comet tail. On VA panels it is usually a dark smudge; with too much overdrive it flips into inverse ghosting, a bright or coloured fringe around the object. In games it reads as smeary, double-edged movement when you pan the camera, and text scrolling leaves readable-after-images.

Can ghosting be fixed or reduced?

You cannot change a panel's physical response time, but you can usually reduce visible ghosting: use the highest refresh rate your monitor and cable support, try each overdrive setting in the monitor's menu (the middle one is most often best — the strongest adds overshoot), and keep response-time enhancers honest by testing here after every change. If trails are extreme on a new monitor at its advertised settings, that is a reason to talk to the retailer.

Is ghosting a fault, or normal?

Some trailing is physics, not a fault: every LCD pixel takes milliseconds to change colour, and your eyes add persistence blur on top, so a short soft smear at speed is expected on any panel. It crosses into fault territory when trails are extreme at the monitor's advertised refresh rate and recommended overdrive setting, far worse than reviews of the same model show, or much worse than when the monitor was new.

How this test works: the UFO's position is computed from elapsed time, not from frame counts, so 480 to 1,920 pixels per second means exactly that at any refresh rate. The refresh-rate readout is measured from the display's own frame timestamps. The comparison lanes re-draw the UFO at your full rate, half rate and quarter rate at once, which isolates the blur caused by frame duration alone.