Microphone Test
This microphone test listens through your browser and shows a live waveform and a level meter in dBFS — the same scale recording software uses. Healthy speech peaks between about -18 and -6 dBFS, a quiet room's noise floor sits below -50 dBFS, and a 10-second record-and-playback check lets you hear exactly what everyone else hears on your calls.
Press start, allow microphone access, and speak at your normal volume. The meter should move with your voice and peak in the healthy zone — then record a sentence and play it back to hear exactly what everyone else hears.
- Live waveform + level meter in dBFS with peak hold and a clipping counter.
- Noise floor readout — how quiet your room really is between words.
- Record & playback — a 10-second clip, held only in this page's memory.
Private by design: your voice is analysed locally by your browser's audio tools. Nothing is uploaded, nothing is stored, and the playback clip is gone the moment you leave this page.
Your browser will ask for microphone permission · audio only · stop any time
Level in dBFS — decibels relative to digital full scale. It is a relative scale, not a calibrated loudness (dB SPL) measurement; no browser can measure real-world loudness.
Level now
-inf
Peak
-inf
Clips
0
Listening…
Microphone problem
What the levels mean
The meter reads in dBFS — decibels below full scale, the largest signal your device can represent. 0 dBFS is the ceiling: anything that hits it is clipped and sounds harsh and distorted. Normal speech, spoken at a natural volume a comfortable distance from the mic, should peak between about -18 and -6 dBFS, with roughly -12 dBFS the sweet spot most call apps are tuned for. If your peaks sit below -30 dBFS, callers will strain to hear you and any noise reduction in the app will chew your words; if you live near 0, every laugh distorts.
The noise floor is the level of your room when you say nothing. Below -60 dBFS is a quiet room; -60 to -50 dBFS is good; -50 to -40 dBFS adds audible hiss; above -40 dBFS the room itself — fans, traffic, a fridge — is loud enough that apps may start pumping and gating your voice. The gap between your speech peaks and the noise floor is what listeners actually experience as clarity. Note the honest limit: dBFS is relative to digital full scale, not a calibrated loudness scale. This test cannot tell you a sound pressure level in dB SPL — no browser can.
Works here but not in Zoom or Discord?
That split is the most useful result this test can give you. This page talks to your microphone directly through the browser, with no app in between. If the meter moves here and the playback sounds like you, your hardware, drivers and browser are all fine — the problem lives in the calling app's own settings: the wrong input device selected (the classic), its input volume, or aggressive noise suppression swallowing a quiet voice. Open the app's audio settings, pick the same microphone named in the picker above, and run its built-in test.
If the meter does not move here, work down this list: the device picker above (browsers love defaulting to a webcam mic across the room), a hardware mute key or headset mute switch, your system input volume, then system privacy settings, which can block the browser from every mic on the machine.
Frequently asked questions
How do I know if my microphone is working?
Speak at your normal volume and watch the meter: if the waveform moves and your peaks land between about -18 and -6 dBFS, the microphone is working. The surest check is the record-and-playback button — record one sentence and play it back. That recording is what everyone else hears, through the same processing your calls use.
How do I test my microphone on Windows 11?
The fastest way is this page: press Start, allow access, and speak — no settings menus needed. Windows also has a built-in check at Settings, then System, then Sound: under Input, pick your microphone and use the test control, which reports your volume as a percentage. If the mic works here but not in an app, the app's own input setting is the problem, not Windows.
How do I test my microphone on a Mac?
Press Start here and allow access — if the meter peaks in the healthy zone, the mic works. On macOS you can also open System Settings, then Sound, then Input: select the microphone and speak, and the input level meter should respond. If nothing moves there or here, check System Settings, then Privacy and Security, then Microphone, and make sure your browser is allowed.
How do I test my mic in Teams or Zoom?
Test here first — it separates hardware problems from app settings in about ten seconds. If your mic passes here, go to the app: in Zoom, open Settings, then Audio, and use Test Mic to record and play back your voice. In Teams, open Settings, then Devices, and choose Make a test call. In both, the usual fix is selecting the same microphone by name rather than leaving the app on a default device.
How do I test my AirPods or Bluetooth headset microphone?
Connect the headset first, press Start, and look at the device picker — your AirPods or headset should appear by name; select it if the browser picked something else. One honest warning: Bluetooth headsets switch to a lower-quality hands-free mode when the mic is active, so playback will sound more like a phone call than your laptop's built-in mic. That is the Bluetooth profile, not a fault — and it is exactly what callers hear.
Is my voice recorded or sent anywhere?
No. The meter and waveform are computed locally in your browser, and the optional playback clip is held only in this page's memory — it is never uploaded, and it disappears when you leave or reload the page. The download button saves the clip to your own device only if you click it.
How this test works: the test opens your selected microphone through the browser's standard audio interface and analyses the signal with an analyser node: the waveform, the RMS level converted to dBFS, a peak-hold reading, a clipping counter and a noise-floor estimate from the quietest moments. Recording uses the browser's media recorder into page memory only.