Dead Pixel Test
This dead pixel test fills your whole screen with solid black, white, red, green, blue, yellow, cyan, magenta and grey, one colour at a time. On a plain colour field, faulty pixels stand out: a dead pixel stays black on every screen, a stuck pixel glows one fixed colour, and a hot pixel stays white. The full cycle takes about a minute on any monitor, laptop or phone.
Nine solid colours will fill your entire screen, one at a time. On a plain colour field, a faulty pixel has nowhere to hide.
- Dead pixel: stays black on every colour — that pixel never lights up.
- Stuck pixel: glows one fixed colour (red, green or blue) on every screen.
- Hot pixel: stays bright white on every colour — easiest to spot on black.
Before you start: wipe the screen clean (a dust speck fakes a dead pixel perfectly), turn the brightness up, and dim the room lights.
9 colours · click or use the arrow keys to move through them · Esc exits at any time
Test complete
All 9 colours shown
If every screen looked perfectly even, your panel has no dead, stuck or hot pixels that the eye can find. If you spotted a dot, note which colours it appeared on — that tells you whether it is dead (always black) or stuck (always one colour).
- Bought the screen recently? Check it again today and use the shop’s return window — most warranty policies allow a few bad pixels before they will act.
- One stuck pixel is not an emergency: they sometimes free themselves over a few days of normal use. Dead pixels, sadly, are permanent.
- A line or a patch is a different fault — that is panel or cable damage, and it can get worse.
- Found one that’s lit but stuck? Try the Stuck Pixel Fixer — rapid colour noise can sometimes free a stuck subpixel.
How the test works
Every pixel on your screen is three subpixels — red, green and blue — mixed at different strengths to make every colour. A solid fullscreen colour forces a simple, checkable state: on the red screen, for example, every red subpixel should be fully on and every green and blue subpixel fully off. A dot that glows green on the red screen is stuck on; a dot that stays black on the white screen never lights at all. Faults that are invisible in photos and games jump out on a plain field.
The nine colours are chosen to cover every combination that matters: black exposes hot and stuck pixels, white exposes dead ones, red, green and blue isolate each subpixel colour, yellow, cyan and magenta pair subpixels up so one weak channel visibly tilts the colour, and grey reveals weak pixels and uneven backlight patches (sometimes called clouding) that the pure colours can miss. Move slowly, scan the panel in a grid pattern, and check the corners and edges as carefully as the centre.
Give each colour a few seconds and view from your normal sitting distance first, then closer. On OLED screens black is a true off-state, so anything glowing on the black screen deserves a second look; on LCDs a faint, even glow on black is just the backlight and is normal.
Found a bad pixel? What to do next
First, be sure it is really in the panel: wipe the spot with a microfibre cloth and check whether the “pixel” moves or vanishes — dust and dried droplets impersonate dead pixels so well that support lines ask about them first. A real faulty pixel sits in exactly the same place on every colour and never moves.
If the screen is new, act inside the return window rather than the warranty: most manufacturers’ pixel policies (based on the ISO 9241-307 classes, which replaced ISO 13406-2 in 2008) only count a panel as defective after several faulty pixels, while a shop exchange usually just needs the fault to be visible. If the screen is older and the pixel is stuck rather than dead, rapid colour-cycling for 10–20 minutes or a few days of normal use sometimes frees it — try the gentle options, never press hard on the panel, and accept that a dead pixel is a permanent resident. One pixel at the edge of a large screen is worth far less worry than one in the centre.
Frequently asked questions
What is the difference between a dead pixel and a stuck pixel?
A dead pixel is off on every colour — its transistor has failed, so the pixel (or one of its red, green and blue subpixels) never lights up, and it looks like a permanent black dot. A stuck pixel is the opposite fault: one subpixel is jammed on, so the dot glows a fixed red, green or blue on every screen and is easiest to see where that colour should be absent. Dead pixels are permanent; stuck pixels occasionally recover.
Can a stuck pixel fix itself or be fixed?
Sometimes. A stuck subpixel is often a marginal electrical contact, and it can free itself over hours or days of normal use. Colour-cycling tools that flash the area rapidly for 10–20 minutes, or very gentle warmth and pressure on the spot with a soft cloth, work for some people — but press too hard and you can damage the panel or create more bad pixels. A truly dead pixel cannot be revived by any of these tricks.
How many dead pixels are acceptable on a new monitor?
Manufacturers base their warranty classes on ISO 9241-307 — the current standard, which replaced ISO 13406-2 in 2008. Its widely used Class II allows up to 2 bright and 2 dark full pixels, plus a few faulty subpixels, per million pixels before a panel counts as defective, though brand policies vary and premium lines often promise zero bright pixels. That makes the return window your real protection: run this test the day a new screen arrives, and if you find a bad pixel in the middle of the panel, exchange it under the shop's returns policy rather than fighting a warranty claim later.
Can dead pixels spread?
A single dead or stuck pixel does not spread to its neighbours — it is a lone failed transistor among millions. What can grow is a different fault: lines, patches or spreading dark blobs usually mean panel damage, a failing backlight or a bad cable, and those do get worse. If you see a cluster or a line rather than a single dot, treat it as damage, not a pixel fault.
Does this test work on phones, tablets and TVs?
Yes — anything with a web browser and a screen: phones, tablets, laptops, monitors and smart TVs. Run it fullscreen and work through all nine colours; on OLED screens the black step is a true black because the pixels simply switch off, which makes bright hot pixels especially easy to spot. Viewing in a dim room and at a slight distance helps on every panel type.
How this test works: the colour screens are drawn locally by your browser in fullscreen; nothing is uploaded and nothing about your display leaves this page. It is a visual check by eye — it cannot certify a panel for a warranty claim, but it finds what your eye would find.
Related tests
Refresh Rate Test
Measure your monitor’s real refresh rate in Hz, frame time and stability.
6/xVisual Acuity Test
Snellen-style eye chart — how sharp is your distance vision?
logCSContrast Sensitivity Test
Read letters as they fade toward the background.
fixStuck Pixel Fixer
Flash a stuck pixel with rapid colour noise to try to revive it.