TestBenchmark logoTestBenchmark

DPI Analyzer

This DPI analyzer — a mouse DPI test and DPI checker in one — measures your mouse’s real DPI (dots per inch): drag your mouse an exact distance — 1 inch, 2 inches, 5 cm or 10 cm — and it counts how many counts of movement your mouse reports. The count divided by the distance is your true DPI, which is often different from the number set in your mouse software.

Pick a distance, press start, then drag your mouse exactly that far across your desk or mouse mat. The tool counts every count your mouse reports while you drag — counts ÷ distance = your real DPI.

This bar is 1 inch wide at the standard screen density — treat it as a rough guide. What counts is the distance your hand actually moves; measure it against a real ruler or the edge of your mouse mat.

Desktop browser recommended · turn off pointer acceleration for the cleanest reading

How to check your mouse DPI with this analyzer

DPI — dots per inch — is a simple ratio: how many movement counts your mouse sends to the computer for every inch it travels. Drag exactly one inch and get 800 counts, and your mouse is running at 800 DPI, whatever the box or the software claims. This tool counts the raw movement values your browser receives while you drag (using pointer lock so the cursor cannot escape mid-drag), and divides by the distance you chose.

The on-screen bar is drawn at the web’s standard density of 96 CSS pixels per inch, so it is only a visual guide — screens vary. Your hand is the measuring instrument here, so line the mouse up against something real: a ruler, the edge of the mouse mat, or two coins a known distance apart. Drag slowly and steadily, in one smooth motion, and the reading lands within a few percent of the truth.

For the cleanest measurement, turn pointer acceleration off first. Acceleration reports more counts when you move faster, so the same one-inch drag at two speeds produces two different “DPIs”. With acceleration off, counts depend on distance alone — which is the whole point of the number.

What to do with your DPI number

On its own, DPI is only half your setup. What your hand actually feels in a game is eDPI — DPI multiplied by in-game sensitivity — and the physical version of the same idea is cm/360: how far you drag to turn a full circle. Once you know your true DPI, plug it into our eDPI Calculator to compare setups across games, or into the Mouse Sensitivity Converter to carry the same feel into a new title.

As for the number itself: 400–800 DPI suits big, deliberate arm aiming; 800–1600 is the all-round zone most people settle in; past 3200 the cursor gets twitchy for almost everyone outside of marketing copy. If this test shows your mouse is far from its setting — a cheap sensor under-reporting, or software scaling quietly switched on — fix the setting, then measure again to confirm the change actually took.

Frequently asked questions

Why is my measured DPI different from the setting in my mouse software?

A few things can pull the real number away from the label. Some mice interpolate or scale steps at very high DPI settings, cheap sensors under-report during fast moves, and some software settings are simply optimistic. Drag distance matters too: a 1 mm slip over a 1-inch drag is about a 4% error, which is why the 10 cm drag gives the tightest reading. If your result is within about 5% of the setting, your mouse is honest.

Does the Windows pointer speed setting affect this test?

The counts this tool reads are the movement values your mouse reports to the browser, which mostly bypass the Windows pointer-speed slider — that slider scales the cursor afterwards. What does skew the reading is pointer acceleration ('Enhance pointer precision' in Windows, or acceleration in mouse software), because it changes counts based on speed. Turn acceleration off and drag at one steady speed for a clean measurement.

What is the difference between DPI and CPI?

Nothing real. DPI (dots per inch) and CPI (counts per inch) describe the same thing: how many movement counts the sensor reports for one inch of travel. Gaming brands split between the two terms for marketing reasons. This analyzer measures counts per inch, so the number it gives you is your DPI/CPI either way.

How do I change my mouse DPI afterwards?

Most gaming mice have a DPI button behind the scroll wheel that steps through presets, and the exact values are set in the maker's software (Logitech G Hub, Razer Synapse, SteelSeries GG and so on). Office mice usually sit at a fixed 800–1600 DPI with no setting at all. If this test shows your DPI is not what you thought, fix it in the software first, then re-measure to confirm.

What DPI do most gamers actually use?

Measured honestly, most competitive FPS players land between 400 and 1600 DPI, with 800 the most common single value — paired with an in-game sensitivity, that gives an eDPI of roughly 200–400 in tactical shooters. Very high settings like 12,000 DPI are marketing numbers: at that level a one-millimetre hand movement throws the cursor across the screen, so almost nobody plays on them.

How do I check my mouse DPI without software?

Use the analyzer on this page — no install needed. Turn pointer acceleration off, pick a distance (10 cm gives the tightest reading), line the mouse up against a ruler or the edge of your mouse mat, press start and drag exactly that far. The tool counts the raw movement counts your mouse reports and divides by the distance: that is your real DPI. Run it two or three times and average the results.

How this test works: movement counts are read and divided locally in your browser while you drag; nothing is uploaded. Accuracy depends on how exactly you drag the chosen distance — the longer distances and acceleration turned off give the tightest reading.