Mouse Test
This mouse test checks whether your mouse is actually healthy — every button, the scroll wheel, double-click faults, stuck buttons, tracking and polling rate — in one guided check with a plain-English report at the end. One honest limit up front: a web page only sees the buttons your browser exposes, so DPI and macro buttons handled by your mouse software never arrive here — and touchscreens have no buttons or wheel to test.
Pick the mouse you are testing. The score only counts the buttons your mouse actually has — a 3-button mouse is never marked down for missing side buttons, and a trackpad is only judged on its click and scroll.
Testing all 5 buttons: Left, Middle, Right, Back and Forward.
1 · Live mouse visualizer
Click anywhere inside the box with your mouse — the button you press lights up, and its counter goes up by one. Pressing the wheel itself counts as the middle button. Right-clicking inside the box will not open a menu here, because the test needs that click.
Left
0
Middle
0
Right
0
Back
0
Forward
0
Scrolled up
0
Scrolled down
0
Reversed steps
0
Roll the wheel UP — 0 of 10 steps.
No clicks yet — press any mouse button inside the box.
A button that never lights up is either dead or not reaching the browser — click it 20 times in the checklist below before you conclude anything.
2 · Guided checklist
Work through the steps in any order — each one ticks itself off as you do it. A step only counts when the mouse really does it: 20 real presses, 10 real wheel steps each way, five real double-clicks.
3 · Tracking canvas — is the sensor skipping?
Move your mouse in slow, straight lines across the canvas. The canvas draws your raw pointer path exactly as the browser sees it — smooth lines mean a healthy sensor, sudden gaps or jumps at slow speeds mean the sensor is skipping.
Path drawn
0 points
Distance
0 px
Jumps found
0
Draw a slow line across the canvas — 400 px of path completes this step.
4 · Polling rate — fast circles, 3 seconds
Press Start, then move your mouse in fast circles inside the visualizer box above for three seconds. The test counts how many position reports arrive per second — that is your polling rate in Hz. Most office mice report at 125 Hz, gaming mice at 500 or 1000 Hz.
Polling rate
— Hz
Peak
— Hz
Reports counted
0
Not measured yet.
5 · Your mouse report
The report reads everything the test has seen so far and names the faulty part — or tells you the mouse is healthy. Run the checklist first for a full score; the report also works on partial data and says plainly what was not tested.
Go deeper with a dedicated test:
Double Click Test · Scroll Test · Debounce Test · Mouse Polling Rate Test · DPI Analyzer · CPS Test · Mouse Accuracy Test
Honest limits
DPI and macro buttons are usually handled by your mouse software, so they never reach a web page — this test cannot see them. Use the DPI Analyzer to measure DPI instead. Some browsers report mouse movement at most once per screen refresh, so a 1000 Hz mouse can read as 60 Hz here — try Chrome for the truest polling number. Touchscreens cannot test buttons or a wheel at all: taps arrive as touch events, not mouse clicks, so use a computer for this test.
How to test your mouse in 7 steps
1 · Pick your mouse. Choose 5-button, 3-button or trackpad at the top. The score only counts the buttons your mouse actually has, so a 3-button mouse is never marked down for missing side buttons.
2 · Click every button 20 times. Click in the visualizer box with each physical button — left, middle (press the wheel), right, Back and Forward. Each press lights up its zone and adds one to its counter. A healthy button answers all 20; a dead one stays at 0.
3 · Roll the wheel up, then down. Ten steps up, then ten steps down. Any step that goes the wrong way while you are rolling steadily counts as a reversed step — that is the jumpy-scroll fault, and a healthy wheel shows zero.
4 · Double-click five times. Click the left button twice in quick succession, five times over. The test records your fastest interval in milliseconds — and watches for the extra clicks under 30 ms that mean a bouncing switch.
5 · Hold each button for three seconds. Press and hold, then let go. A button that stays down after you release it — or never sends the release at all — is stuck, and the test flags it.
6 · Fast circles for polling. Press Start and move in fast circles inside the box for three seconds. The test counts the position reports per second and shows your polling rate in Hz with the peak.
7 · Read your report. Press “See my mouse report” for a score, a plain list of any faults found — with the faulty button named — and what to do about each one, plus links to the dedicated tests that dig deeper.
The four faults this test finds
Double-clicking
One press reaches your computer as two clicks, so files open when you only meant to select them and drags drop halfway. The cause is almost always a worn switch bouncing — the metal contact closes, opens and closes again within a few milliseconds. This test flags it only when both signs are present: an extra click less than 30 ms after the last press, and a press too short to be a real human click.
A dead button
The button does nothing at all: its counter stays at 0 while the other buttons count normally. Before you conclude it is dead, try another USB port and another computer — if it stays at 0 everywhere, the switch or its wiring has failed, and no setting or driver will bring it back.
A stuck button
The button stays pressed after you let go — windows keep dragging, text keeps selecting, clicks keep firing. The test watches for a press that never ends: if a button is still down 10 seconds after you pressed it, it is flagged as stuck. Try unplugging the mouse and plugging it back in; if it sticks again, the switch has failed.
A jumpy scroll wheel
The page jumps backwards while you scroll one way, or scrolls two steps for one notch. The test counts reversed steps — wheel steps that go against the direction you are rolling — and a healthy wheel shows zero in a steady 10-step roll. The usual cause is a worn scroll encoder or dust inside the wheel; compressed air or contact cleaner sometimes saves it.
Why does a mouse double-click on its own?
A click is a tiny metal contact closing inside the switch. When the switch wears out, the contact bounces: it closes, springs open and closes again in a few milliseconds, and your computer sees two clicks for one press. That is why the fault gets worse over months — the contact gets rougher, the bounce gets longer, and eventually every click doubles. This test separates a bouncing switch from fast clicking with a two-sign rule: an extra click counts as a fault only when it arrives less than 30 ms after the last press and the press before it was too short to be a real human click. A fast clicker presses for 60 ms or more and leaves 80 ms or more between clicks, so neither sign fires and the test never falsely flags a healthy mouse. The debounce test measures the same bounce in more detail.
Polling rate: what the numbers mean
Polling rate is how many times per second your mouse reports its position to your computer, in hertz. The table below is the scale this test grades against:
125 Hz — 8 ms between reports: standard office mice, fine for everyday work. 250 Hz — 4 ms: a step up, common on better office and budget gaming mice. 500 Hz — 2 ms: the gaming standard — smooth enough that most players never need more. 1000 Hz — 1 ms: competitive gaming mice; the difference from 500 Hz is real but small. If your mouse is sold as 1000 Hz and this test reads 125 Hz, try another USB port first — some hubs and front-panel ports cap the rate — and try Chrome, because some browsers only report movement once per screen refresh. The mouse polling rate test measures the same number on its own.
Double-click speed and the 500 ms rule
Your operating system counts two clicks as one double-click when they land within 500 ms of each other — that is the threshold this test uses too. A good double-click is anything comfortably under it: most people double-click in 100 to 200 ms. This test shows your fastest interval in the checklist. If your fastest is slower than 500 ms, the mouse is fine and the setting is the problem — shorten the double-click time in your operating system settings (Windows: mouse settings, then double-click speed; macOS: System Settings, then Mouse) and double-clicking will start working. If the test flags extra clicks under 30 ms, that is a different problem — a bouncing switch, not slow clicking — and changing the setting will not fix it.
How to fix a double-clicking mouse
Work through it in order, cheapest first. First, the warranty: a double-clicking switch on a mouse under warranty is a replacement, not a repair — contact the maker before you open anything. Second, contact cleaner: a short spray under the button, then click it 30 to 40 times firmly to work the cleaner in and clear debris — this fixes the fault surprisingly often. Third, the switch itself: if the cleaner does not help, the switch is worn and needs replacing, either by soldering in a new switch or by replacing the mouse. Mice with optical switches do not bounce at all, because there is no metal contact to wear — if you replace the mouse, that is the upgrade that ends the problem for good.
Testing a mouse before you buy it — or send it back
Run this test the day a new mouse arrives, while the return window is still open. Click every button 20 to 30 times, roll the wheel both ways, double-click five times and hold each button for three seconds — the same checklist as above. A new mouse should pass all of it with a clean report: zero double-click faults, zero reversed scroll steps, no stuck buttons. If anything is flagged on day one, send it back rather than hoping it gets better — a switch that bounces on arrival only bounces more with use. The same check works in a shop on a display model, if the shop lets you plug the mouse into a laptop.
What this test cannot see
A web page only sees what the browser passes on. DPI and macro buttons are usually handled by your mouse software before the browser ever hears about them, so they never arrive here — measure DPI with the DPI Analyzer instead, and test macro buttons in the software that programs them. Some browsers also cap movement reports at the screen refresh rate, so a 1000 Hz mouse can read as 60 Hz in the wrong browser — Chrome gives the truest polling number. And touchscreens cannot test buttons or a wheel at all, because taps arrive as touch events, not mouse clicks. Within those limits, what this page measures is what your games and apps see too: the same clicks, the same wheel steps, the same reports.
Frequently asked questions
How do I test my mouse buttons online?
Click each button in the visualizer above: left, middle (the wheel click), right, Back and Forward. Every press lights up its zone and adds one to its counter. The checklist asks for 20 presses per button — a healthy button answers all 20, and a dead button stays at 0 no matter how hard you press it. If your mouse has no side buttons, switch to 3-button mode; if you are on a trackpad, switch to trackpad mode so the score only judges the click and the scroll you actually have.
How do I test my mouse scroll wheel?
Roll the wheel up 10 steps, then down 10 steps, in the checklist above. The wheel strip counts steps in each direction, and any step that goes the wrong way while you are rolling steadily is counted as a reversed step — that is the jumpy-scroll fault. A healthy wheel rolls 10 steps in one direction with zero reversed steps. If the page keeps jumping backwards while you scroll, the scroll test gives you a closer look at the same fault.
How do I test mouse tracking?
Move your mouse in slow, straight lines across the tracking canvas above. The canvas draws your raw pointer path exactly as the browser sees it. Smooth lines mean a healthy sensor; sudden gaps or jumps at slow speeds mean the sensor is skipping — usually a dirty lens or a worn sensor. Clean the lens with a dry cloth and try again on a plain surface; if the jumps stay, the sensor itself is failing. The mouse accuracy test checks the same sensor in a different way.
Why does my mouse double-click when I click once?
Almost always, the switch under the button is worn. A click is a tiny metal contact closing, and a worn contact bounces — it closes, opens and closes again in a few milliseconds, so one press reaches your computer as two clicks. This test only calls it a fault when both signs are present: an extra click less than 30 ms after the last press, and a press that was too short to be a real human click. That way fast clickers are never falsely flagged. The fix, in order: check the warranty first, try contact cleaner under the button, click the button 30 to 40 times firmly to clear debris, and if it still double-clicks, the switch needs replacing.
How do I check my mouse polling rate?
Press 'Start 3-second circles' above and move your mouse in fast circles inside the box for three seconds. The test counts how many position reports arrive per second and shows the rate in Hz with the peak. Most office mice report at 125 Hz, gaming mice at 500 or 1000 Hz. If your mouse is sold as 1000 Hz but this test reads 125, try another USB port — and note that some browsers only report once per screen refresh, so try Chrome for the truest reading. The mouse polling rate test measures the same number in more detail.
How do I know if a mouse button is dead?
Click it 20 times in the visualizer above. If its counter stays at 0 while the other buttons count normally, the button is dead — or the click is not reaching the browser at all. Before you conclude that, try another USB port and another computer: if it stays at 0 everywhere, the switch or its wiring has failed, and no setting or driver will bring it back. That is a warranty or replacement job, not a software fix.
What is a good double-click speed?
Your operating system counts two clicks as one double-click when they land within 500 ms of each other, so a good double-click is anything comfortably under that — most people double-click in 100 to 200 ms. This test shows your fastest double-click interval in the checklist. If your fastest is slower than 500 ms, the mouse is fine and the setting is the problem: shorten the double-click time in your operating system settings and the double-click will start working. If the test flags extra clicks under 30 ms, that is a different problem — a bouncing switch, not slow clicking.
Can I test a mouse on a phone or tablet?
No — not the buttons or the wheel, anyway. A touchscreen has no physical buttons and no scroll wheel, so there is nothing for this test to measure: taps on a phone screen arrive as touch events, not mouse clicks. Use a computer with a real mouse for this test. The page still works on a phone for reading, but the visualizer, the checklist and the report all need a mouse.
How this test works: every number is measured in your browser from PointerEvents and performance.now() timestamps — the visualizer, the checklist, the tracking canvas and the polling measurement all run locally with no downloads, no sign-up and nothing uploaded. A web page only sees the buttons the browser exposes; DPI and macro buttons handled by your mouse software never arrive here.
Related tests
Double Click Test
Measure your double-click speed in ms — and catch a bouncing switch.
↕Scroll Test
Count every wheel step up and down — and spot the jumps.
HzMouse Polling Rate Test
Measure your mouse’s actual polling rate in Hz.
DPIDPI Analyzer
Measure your mouse’s real DPI by dragging a known distance.